Machinery

Category Manufacturer Model Year HP Lift Capacity Description S/N Price
Wheel Terex TSR60 2014 56-65 1500-1999 1140 hours. Open cab, ISO (pilot) controls, Manual quick attach, Single speed travel, Standard flow auxiliary hydraulics to run attachments, Deluxe comfort seat, Working glow plugs and lights. Good tires. Snappy loader that starts and runs great. Comes with a good used bucket. 15800
Wheel Mustang 1500R 2015 36-45 1500-1999 Only 670 Hours. Rust-free loader that starts, runs and operates great. Open cab, Standard hand/foot controls, Manual quick attach, Single speed travel, Standard flow auxiliary hydraulics to run attachments, Working glow plugs, Working lights, Bucket leveling. Brand new 10x16.5 rims and tires. Sun-faded paint has been touched up. Comes with a used bucket (new bucket shown available as an upgrade). 16800
Track Terex R070T 2016 < 35 < 1499 Only 700 hours. Open cab, ISO (pilot) hand controls, Single speed travel, Manual quick attach, Standard flow auxiliary couplers, Working glow plugs, Working lights. Undercarriage is very good. Tracks are 50%. Comes with a 48" bucket. Starts, runs and operates great so you can put it right to work. Specs: 33hp Perkins diesel, 950# safe operating at 50% (all the way up), 1900# full tipping capacity, 10gpm standard auxiliary flow to run attachments (Similar specs to a PT30, ASV RT40 or Bobcat T450). Only 48" wide; yet, the cab is comfortable for large operators. The ASV track system is fantastic for flotation and for putting power to the ground when needed. 17800
Track Mustang MTL25 2007 86+ 3000 > 3300 hours. H-pattern hand controls, Manual quick attach pins, 2-Speed travel, Factory cab enclosure and heat (new door glass and wiper have been installed since photos were taken), Standard flow auxiliary hydraulics to run attachments, Deluxe high-back air-ride seat and working glow plugs and lights. Nice 18" tracks, Good undercarriage. New left side joystick controller installed since photos taken ($1000). Fresh hydraulic fluid and filters service. Specs: 97hp Yanmar diesel, 3500# safe operating capacity (50%), 7000# full tipping capacity, 23.9gpm auxiliary, 10,600# machine weight. (This is the same loader as a Gehl CTL80 or a Takeuchi TL150 - all three are made in the same factory). 19800
Wheel Bobcat 873 1997 66-75 2000-2499 3700 hours. Open ROPS (Cab enclosure and heater available - see sample pics). Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics to run attachments, Working glow plugs, Bucket leveling option. Has good 12x16.5 extreme duty tires. Comes with a used standard duty bucket. The new bucket shown is available as an upgrade. A rebuilt engine (see photo of engine placard) was installed in 2011 and has approximately 800-900 hours on it now. The previous owner used it to clear snow around his trailer court property and is upgrading to a newer loader. The loader starts and runs very good. The drive motors feel strong. A new muffler was just installed and the motor was recently serviced. Overall, it seems like it has been maintained well. The original steering linkages have been replaced with new steering cables that allow the machine to wander a bit. It still operates fine - just a little looser. Watch the video for operation. Specs: 73hp diesel, 2400# safe operating capacity, 4800# tipping capacity (Previous model to the S250/S650) 12800
Wheel Gehl 5640E 2006 76-85 2000-2499 1350hrs. Open cab, Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics to run attachments, Working front lights, Working glow plugs. Has heavy bumper counterweight for increased lift capacity. Comes with a used bucket. Loader was repainted by previous owner. Specs: 82hp Deutz diesel, 2200# safe operating capacity, 4400# tipping capacity (Similar specs to a Bobcat S220 / S250) 15800
Wheel Bobcat S850 2015 86+ 3000 > 2090 hours. Pre-DEF. Clean, well-maintained loader that starts, runs and operates great with no known issues. Cab/Heat/AC (cold air), Advanced Selective Joystick Controls (ISO or H-pattern), Power quick attach, Two-speed travel, High flow auxiliary hydraulics with electronic hookups, Bucket leveling, Deluxe seat, Working lights, Working glow plugs, Engine block heater, Hanging brackets for rear weights (no weights included). Comes with a brand new heavy duty contractor bucket. Specs: 100hp non-DEF diesel, 3950# safe operating capacity, 7900# tipping capacity, 23gpm/35gpm standard/high flow auxiliary hydraulics. 36800
Track Bobcat T300 2006 76-85 3000 > 4400 hours. Was used by a local garden center as their yard machine. Factory cab enclosure with heat and air (air may need recharged), Selectable Joystick Controls (SJC - hand only or hand/foot controls, Single speed travel, Manual quick attach, Standard flow auxiliary hydraulics to run attachments, Deluxe comfort seat, Engine block heater. Undercarriage and sprockets are good. Tracks are good with 50% tread remaining. Comes with a good bucket. New starter, ring gear, lower boom pins, drive belt and seat cushions. Also new cab and engine air filters and a fresh oil change. Starts, runs and operates good and ready to go right to work. Specs: 81hp diesel, 4600# safe operating at 50%, 9200# full tipping capacity, 21gpm auxiliary flow (similar specs to the newer Bobcat T750). 20800
Wheel New Holland LS190 2001 76-85 2500-2999 Only 1530 hours. Enclosed cab with heat, Two-speed travel, Manual quick attach, Standard hand/foot controls, Standard flow auxiliary hydraulics to run a variety of attachments The 14x16.5 tires are in good shape but have limited tread remaining. Comes with a brand new standard duty bucket. This loader was owned by a large snow removal company and was used for that purpose only. It was parked during the summer and was never used in construction, on a farm or around fertilizer. That said, it does some rust on the body of the machine from road salt but it appears to be in excellent mechanical condition reflective of the low hours. The rims have been repainted and the decals are new but everything else is original. It starts, runs and operates very good so it can go right to work. Specs: 81hp diesel, 2800# safe operating capacity, 5600# tipping capacity (Similar specs to Bobcat S300 / S650). 19800
Wheel New Holland LS170 2000 46-55 1500-1999 3100 hours. Open cab, Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics, Working lights, Working glow plugs, Rear weights, Good tires. Starts, runs and operates very good. The tilt pedal is a bit sticky but works as it should. No other known mechanical issues. Paint is flaking off in places and there is surface rust but no heavy corrosion. Comes with a good used bucket. Specs: 50hp diesel, 1750# safe operating capacity (without rear weights), 3500# full tipping capacity (similar specs to a Bobcat 773 / S175 / S530) 11800

Pages