Machinery

Category Manufacturer Model Yearsort descending HP Lift Capacity Description S/N Price
Wheel Bobcat 873 1997 66-75 2000-2499 3700 hours. Open ROPS (Cab enclosure and heater available - see sample pics). Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics to run attachments, Working glow plugs, Bucket leveling option. Has good 12x16.5 extreme duty tires. Comes with a used standard duty bucket. The new bucket shown is available as an upgrade. A rebuilt engine (see photo of engine placard) was installed in 2011 and has approximately 800-900 hours on it now. The previous owner used it to clear snow around his trailer court property and is upgrading to a newer loader. The loader starts and runs very good. The drive motors feel strong. A new muffler was just installed and the motor was recently serviced. Overall, it seems like it has been maintained well. The original steering linkages have been replaced with new steering cables that allow the machine to wander a bit. It still operates fine - just a little looser. Watch the video for operation. Specs: 73hp diesel, 2400# safe operating capacity, 4800# tipping capacity (Previous model to the S250/S650) 12800
Wheel New Holland LS170 2000 46-55 1500-1999 3100 hours. Open cab, Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics, Working lights, Working glow plugs, Rear weights, Good tires. Starts, runs and operates very good. The tilt pedal is a bit sticky but works as it should. No other known mechanical issues. Paint is flaking off in places and there is surface rust but no heavy corrosion. Comes with a good used bucket. Specs: 50hp diesel, 1750# safe operating capacity (without rear weights), 3500# full tipping capacity (similar specs to a Bobcat 773 / S175 / S530) 11800
Wheel New Holland LS190 2001 76-85 2500-2999 Only 1530 hours. Enclosed cab with heat, Two-speed travel, Manual quick attach, Standard hand/foot controls, Standard flow auxiliary hydraulics to run a variety of attachments The 14x16.5 tires are in good shape but have limited tread remaining. Comes with a brand new standard duty bucket. This loader was owned by a large snow removal company and was used for that purpose only. It was parked during the summer and was never used in construction, on a farm or around fertilizer. That said, it does some rust on the body of the machine from road salt but it appears to be in excellent mechanical condition reflective of the low hours. The rims have been repainted and the decals are new but everything else is original. It starts, runs and operates very good so it can go right to work. Specs: 81hp diesel, 2800# safe operating capacity, 5600# tipping capacity (Similar specs to Bobcat S300 / S650). 19800
Wheel Case 95XT 2002 76-85 3000 > 3900 hours. Open cab (vinyl cab enclosure and heater available), 2-speed travel, H-pattern hand controls, Standard flow auxiliary hydraulics to run attachments, Manual quick attach, Hand and foot throttles, Working glow plugs, Working Lights, Run-flat tires in very good condition (pneumatic tires available if you prefer a softer ride and more aggressive tread). Starts, runs and operates good with no known leaks, smoke or excessive noise. The hydraulics operate smoothly. This loader can be put right to work. Specs: 85hp diesel, 3150# safe operating 6300# tipping capacity (Similar specs to a Bobcat S300/S330 or JD 332). 16800
Wheel Mustang 2076 2005 76-85 2000-2499 4900 hours. Open ROPS, T-bar hand controls (similar to Pilot where left hand steers and right hand runs loader), Manual quick attach pins, Single speed travel, Standard flow auxiliary hydraulics to run attachments (currently inoperable- missing linkage), Working glow plugs, Heavy bumper counterweight, Good tires. Starts, runs and operates good with no odd noises, smoke or leaks. Comes with a used bucket. Specs: 84hp Yanmar diesel (pre-DEF), 2200# safe operating capacity @ 50%, 4400# full tipping capacity, (This loader has similar specs as a Bobcat S220 and is the same as a Gehl 5640E which is made in the same manufacturing facility). 13800
Wheel Gehl 5640E 2006 76-85 2000-2499 1350hrs. Open cab, Standard hand/foot controls, Manual quick attach, Single-speed travel, Standard flow auxiliary hydraulics to run attachments, Working front lights, Working glow plugs. Has heavy bumper counterweight for increased lift capacity. Comes with a used bucket. Loader was repainted by previous owner. Specs: 82hp Deutz diesel, 2200# safe operating capacity, 4400# tipping capacity (Similar specs to a Bobcat S220 / S250) 15800
Track Bobcat T300 2006 76-85 3000 > 4400 hours. Was used by a local garden center as their yard machine. Factory cab enclosure with heat and air (air may need recharged), Selectable Joystick Controls (SJC - hand only or hand/foot controls, Single speed travel, Manual quick attach, Standard flow auxiliary hydraulics to run attachments, Deluxe comfort seat, Engine block heater. Undercarriage and sprockets are good. Tracks are good with 50% tread remaining. Comes with a good bucket. New starter, ring gear, lower boom pins, drive belt and seat cushions. Also new cab and engine air filters and a fresh oil change. Starts, runs and operates good and ready to go right to work. Specs: 81hp diesel, 4600# safe operating at 50%, 9200# full tipping capacity, 21gpm auxiliary flow (similar specs to the newer Bobcat T750). 21800
Track Mustang MTL25 2007 86+ 3000 > 3300 hours. H-pattern hand controls, Manual quick attach pins, 2-Speed travel, Factory cab enclosure and heat (new door glass and wiper have been installed since photos were taken), Standard flow auxiliary hydraulics to run attachments, Deluxe high-back air-ride seat and working glow plugs and lights. Nice 18" tracks, Good undercarriage. New left side joystick controller installed since photos taken ($1000). Fresh hydraulic fluid and filters service. Specs: 97hp Yanmar diesel, 3500# safe operating capacity (50%), 7000# full tipping capacity, 23.9gpm auxiliary, 10,600# machine weight. (This is the same loader as a Gehl CTL80 or a Takeuchi TL150 - all three are made in the same factory). 19800
Wheel Bobcat S300 2010 76-85 3000 > 2725 hours. No DEF. Enclosed cab with heat and air conditioning, Hand/foot controls, Power quick attach, Two-speed travel, High flow auxiliary hydraulics plus electronic control harness, Bucket leveling, Deluxe seat, Working lights, Working glow plugs. Brand new 12x16.5 Camso tires. Comes with a used bucket. This loader was used for snow removal around road salt. As a result, it has lots of peeling/flaking paint and would benefit from new paint but it seems sound mechanically. It starts, runs and operates very good and just received a fresh oil, air and fuel service so you can put it right to work. New paint isn't what gets the chores done... Specs: 81hp non-DEF diesel, 3000# safe operating capacity, 6000# tipping capacity, 21gpm/37gpm standard/high flow auxiliary hydraulics. (Previous model to the S740 / S750, Similar to the New Holland L230 and JD 332). 19800
Wheel Gehl V330 2011 76-85 3000 > Only 1006 hours. No DEF. Enclosed cab with heat, ISO (Pilot) hand controls, Power quick attach, Two-speed travel, High flow auxiliary hydraulics with multiple couplers, Deluxe seat, Working lights, Working glow plugs. Good heavy-duty 14x17.5 Tires. Comes with a new standard duty bucket. Paint is original with some fading, scratches and surface rust. Loader starts, runs and operates great with no known issues. High gear is 12.2mph according to online specs but, it feels much much faster. If you have a long driveway to plow out or just need to drive this loader from one field to another, it will get there fast! Specs: 84hp non-DEF diesel, 3300# safe operating capacity, 6600# tipping capacity, 23gpm/35gpm standard/high flow auxiliary hydraulics. (Newer model of the Gehl 7810 / Mustang 2109. Similar to the Bobcat S330 / S750). 26800

Pages